Overview: how to clean the hood and the grid of grease in the kitchen

A cooker hood will not cause problems if it is periodically cleaned. Removing fresh impurities is much easier than working with old ones. In addition to the awesome appearance, the efficiency of air purification in the kitchen is reduced. With old dirt, the hood may stop working completely. You need to take care of any household appliances, and not only outside. We will tell you the most effective methods, how to clean the hood, grill and filter.

Preparatory stage. Steam cleaning

Before proceeding with the cleaning procedure, it is necessary to carefully study the product passport and determine collapsible areas. The standard algorithm of actions is as follows.

1. Disconnect the hood from the power supply.
2. Remove the grease guard. It can be mounted on clamps, bolts, in some models it is necessary to dismantle the decorative strip.
3. Remove the charcoal filter, if equipped.
4. Disconnect the exhaust pipe that goes from the hood to the ventilation shaft.
5. If there is an air filter, it must also be removed.
6. Assess the degree of contamination and choose the best way to clean the system. To remove particularly old pollution, aggressive exposure techniques will be needed.

Cleaning the hood with a steam generator is the safest method and an environmentally friendly method that does not require the use of chemicals. It can be used to clean the inside and outside of the hood. In addition, it will also be useful for cleaning any surfaces in the apartment. The main advantage is steam, the temperature of which reaches 150 °. It not only effectively removes fat deposits in 5 minutes, but also disinfects surfaces.

Steam cleaning

Automatic cleansing and folk remedies

Can clean the grid in the dishwasher. This method is only suitable for elements made of stainless steel or coated with enamel. Fold all the details into the machine, add the detergent composition and start the program with a minimum temperature. During this time, you can wipe the engine, outer casing and internal parts with detergent.

You can also resort to folk methods. Time-tested home recipes will be invaluable in removing body fat.

Bleach

You can use ordinary bleach to clean a dirty exhaust hood. It is also used for washing and cleaning the housing. To process small parts using an old toothbrush. All surfaces must be carefully treated and left for 15 minutes. Then rinse well and wipe dry.

Bleach cleaning

Lemon and Citric Acid

Citrus acid helps in many household problems. To remove body fat, cut lemon into thick circles and grate all surfaces. After a quarter of an hour, it will become much easier to remove contamination. Citric acid also has a similar effect, 40 grams of which must be diluted in a liter of heated water, treated with a surface and left for 30 minutes.

Lemon Cleansing

Mustard powder

Grandma’s method will help this time too. The application technique is as follows:

• wet the grate with water;
• dilute 3.5 tbsp. l powder with 2 tsp shampoo, add 100 grams of water and vinegar;
• gruel to treat the surface of the lattice;
• wrap the grate with a towel dipped in hot water;
• after 30 minutes, brush the net. Rinse everything thoroughly.

The effectiveness of the powder is enhanced only in warm water. In cold mustard powder practically does not work.

Mustard powder

Baking soda and vinegar in the fight against pollution

Before you clean a contaminated stainless steel hood with a 70% solution of acetic acid, you should wear rubber gloves, since this method cannot be called safe. You will need an old clean rag that needs to be moistened with acetic acid, wiped all surfaces with it and left for 7-10 minutes. In case of severe contamination, extend the processing time to a quarter of an hour.

Dilute acetic acid should be used to combat old dirt. If fresh deposits are being cleaned, the solution can be diluted with water in a 1 to 2 ratio.

Baking soda and vinegar

To remove plaque, you can use soda. The powder is poured onto the surface and wiped with a sponge until all contaminants are removed. After that, the surface must be washed and wiped with a dry cloth. It is not advisable to wipe the glossy surfaces with soda, as scratches may appear.

Baking soda is an assistant for any cleaning at home, in the case of an extract, you can use soda with vinegar. Moisten the surface and pour a thin layer of soda, pour over with vinegar. The result of the reaction will be quick. It is necessary to allow the composition to foam, then leave for 3 hours. Then rinse with water.

Use of laundry soap and ammonia

To remove old dirt, you can use 72% household soap and a brush with metal or plastic bristles.

Use of laundry soap and ammonia

Method 1

To do this, you need to rub 0.5 bars of soap, dissolve it in 2.5 liters of water. Soak the grill in the solution for a quarter of an hour, then thoroughly brush off all contaminated places. Then rinse with running warm water and dry.

Method 2

Digestion is one of the most effective, albeit laborious, methods. To do this, you need a large container to fit the filter. You can take a metal bucket or basin. If you don’t have a large capacity at hand, you can boil in 2 stages: first clean one side, then repeat everything on the other side.

1. Carefully dissolve 250 grams of soda in 5 l of boiling water, grind a piece of laundry soap and 40 grams of salt. There are no clear proportions; the more concentrated the solution, the more effective the cleaning.
2. Dip the grate in boiling water, leave to simmer on low heat for about 15 minutes. Water will gradually turn brown. After that, immediately remove the container from the fire. If the fat is not completely dissolved, you can repeat the cleaning procedure, but already in the updated fluid.
3. After boiling, it remains to remove the residues with a hard bristle brush.

You can rub the wire rack with laundry soap and put on a baking sheet. Pre-add a little water, place in a heated oven for 30 minutes. Soap will perfectly split all deposits. Rinse well afterwards.

Method 3

If the previous method did not help, you can continue to digest the grill, but with liquid ammonia.

1. Dissolve 100 grams of ammonia in 5 l of water.
2. Bring the composition to a boil.
3. Lower the grate into it and leave on low heat for about an hour.

All old pollution will go away, it remains only to remove the remains with a hard sponge or brush, rinse the grate and dry.

Before using ammonia to clean the hood from grease, the kitchen should provide good ventilation.

Grid cleaning

Household chemicals

The trading network offers a wide range of chemicals to effectively remove all kinds of contaminants. This greatly simplifies the task and speeds up the cleaning process.Before use, you should carefully read the instructions so as not to spoil the grill. Also, all work must be carried out with rubber gloves.

Mesh cleaning

Household chemicals for removing body fat

The action of household chemicals is similar to each other. Previously, the product should be applied to the cleaned place and left for some time to soften the deposits according to the manufacturer's instructions. Then remove with a hard brush or sponge and detergent, rinse with running water. If necessary, repeat the procedure until fat is completely removed.

Pipe Cleaners

If household chemicals for cleaning the hood of old fat did not help, you can resort to more aggressive methods. Any means for cleaning sewer pipes will do. Such radical compositions are used no more than two times during the entire operation of the hood. Also, you must follow the instructions and processing time so that the deformation of the structure does not occur.

When processing a liquid composition, it is necessary to fill them with the entire surface of the lattice. This can be done on a baking sheet or in a large container. The reaction will be instant. After 2-3 minutes, remove the grill and rinse thoroughly.

For processing with granular composition, it is necessary to fill in powder with all contaminants and pour boiling water. After 5 minutes, brush with a stiff bristle using cleaners. It is recommended to pour the spent composition of cleaning products into the toilet.

Household chemicals may have an alkaline or acid base. Alkaline preparations are more effective in the fight against severe pollution.

Cleaning the outer casing. How often do you need to clean

The time until the grate is wet in the solution should be used to clean the outer casing. There may also be difficulties. Dust accumulates on fatty deposits and forms a fairly hard coating that cannot be cleaned with hard rosary and abrasive products to prevent microcracks.

Body cleaning

The cleaning procedure is as follows:

• pour any detergent on a soft foam sponge and spread it over the surface;
• any spray can be used to clean kitchen surfaces;
• after a quarter of an hour, wipe everything with a damp cloth. If necessary, repeat the procedure 2-3 times. Then wipe it dry.

Cleaning activities

The degree of contamination can be determined by the appearance of the grate. If red spots appear on it, it is time to carry out a comprehensive cleaning of the hood.

It is recommended to monthly clean the outer casing of deposits, and to clean the grill, engine and fan at least 1 time per quarter, with frequent cooking - at least 1 time per month.