People who monitor their health and, in particular, their body weight, acquire floor Libra.
The most popular option recently - electronic products. An important advantage of such scales over mechanical ones is accurate mass measurement. Mechanical scales cannot guarantee the accuracy of the measurement, and their high sensitivity to overloads leads to malfunctions. Electronic devices, if used properly, will last much longer. All About Choosing Floor Glass Scales in our article.
In addition to weight control, users of electronic devices have other useful functions: the display can view the ratio of fat and muscle tissue, calculate the body mass index and save the previous indicators in the device memory. In order to correctly control body weight, you need to know how to configure a floor electronic scale.
Before weighing, make sure that zero is displayed.
How to set up electronic floor scales?
Before using electronic scales, you need to find out how to properly install them.
To calibrate the product yourself, you need to make sure the batteries are inside the device. Before turning the product on for the first time, remove the protective film from the battery compartment. When installing the battery, it is necessary to observe the polarity in accordance with the marking that is on the case.
LO will be displayed on the screen if necessary battery replacement in the balance. Modern technology allows manufacturers of scales to do without batteries - some gadgets operate on solar or mechanical energy from weighing.
After installing the battery, the scales must be placed on a flat and hard surface, without gaps or depressions.
Carpet is not suitable - it is a soft and unstable surface. Measurement results on carpet are different from the true ones.
Find out how disassemble and repair floor mechanical scales.
On the packaging, as a rule, the operating rules of the device are indicated. The manufacturer guarantees a long service life subject to these rules.
Do not move the structure; it is better to choose one suitable place for constant weighing. Sensors can be configured with a light touch on the surface of the device, usually in the upper right corner. The value 88:88 will appear on the screen, then the eights should change to 0.0. This is the default value on the display, meaning that the device is ready for use.
After you learn how to adjust the electronic floor scales, you can start weighing. If the device is not planned to be used for a long time, the battery must be removed.
Note: what to do if electronic floor scales show the wrong weight?
How to achieve accurate results?
For accurate weighing results, in addition to calibrating the meter, you must observe simple conditions:
- Take off excess load: accessories, outerwear.
- You can’t lean on your hands, you need to weigh yourself with a straight back.
- During weighing you need to freeze. Active movements can not only affect the accuracy of the measurement, but also ruin the device.
The sensors must be adjusted before each weighing, this will help to get the smallest error as a result. Weighing is possible only after the 0.0 icon appears, if you step on the scale earlier, the data will be incorrect.To correct an incorrect value, you must wait until the display goes blank, and then repeat the procedure again.
We recommend that you familiarize yourself with review of the best electronic floor scales.
Feet should be in the middle of the product.
To accurately measure your weight, stand on the device’s platform with both feet. The legs should be located in the middle of the structure, it is undesirable to move during the procedure.
After a certain period of time, the weight in kilograms will appear on the screen. The numbers will be displayed for ten seconds, then the device will turn off. If the device is overloaded, the ERR symbol will appear on the display. When this value appears, the product must be urgently released from the load in order to avoid breakage.
Check out An overview of the best medical floor scales.
When weighing, you need to take off your shoes and take off all your outer clothing
How to extend the life of the balance?
The maximum allowable value for standard electronic scales is 220 kilograms. For different manufacturers and in different models, these readings vary from 100 to 220 kilograms.
The ERR symbol may appear on the display even if the device malfunctions. In this case, you need to make sure the integrity of the body of the balance and the absence of interference for operation.
Electronic products require a careful attitude, a fragile structure can break due to shocks that hit the water device or a damaged sensor. In order for the scales to continue to monitor the health of the owner, it is important to monitor the condition of the product. Observing the rules of operation of the product, you can extend the life of the device and receive accurate information about the state of your figure and physical health.
Read also: sports floor scales - rating of the best models.
