They collected the available dirty laundry, sorted them by colors and plunged inside your irreplaceable assistant. Installed the necessary program and launched it. She began to work safely, but as soon as it was time to start spinning, instead of working properly, the machine tried to gain momentum and after unsuccessful attempts to reproduce on its display a problem with the combination of UE or E4.
A Samsung washing machine, in which the manufacturer does not provide a display, will notify you of its malfunction with the help of a characteristic LED illumination: the LEDs for the washing functions blink and the 60 ° C LED lights up
It should be noted! This combination of problems E4 can only be displayed on Samsung devices that were manufactured until 2007 inclusive.
Fault value
This combination of a UE or E4 malfunction indicates that a drum imbalance has occurred. Those. the machine cannot cope and redistribute things all over the drum on its own (they got lost in one place and do not give the opportunity to redistribute the load). Basically, such a breakdown occurs at certain stages of the spin cycle (during the attempt to gain momentum, i.e., at the 3rd, 7th and, possibly, 9th minute of spinning). In addition, the spinning process may not begin, but instead a malfunction is displayed.
Note! Be sure to distinguish between E4 and 4E. Problem 4E notifies you of problems with water injection.
Please note that such a problem with the combination of characters E4 or UE mainly notifies of a possible breakdown. Therefore, to clarify its availability, you will need to install a quick wash program without using powder or without immersing the laundry. And as the device executes the washing mode and the time comes to start spinning and gaining speed, if there is really a breakdown, the spinning mode will not be performed. The machine will stop the current mode and display a malfunction on its display. If the device has completed the entire set mode, then this indicates that the machine was not able to distribute the load on its own during the previous wash, and you can eliminate the breakdown without calling specialists.
Malfunction E4 or UE, how to fix it, without resorting to professional intervention
- The linen was knocked down in one place. If the machine turned out to be one very overall thing, then it is possible that it has lost or twisted in one place. Therefore, the device cannot redistribute the load on its own and you need help, pause the machine, open the porthole and in the manual mode correctly place things around the drum. Or you will need to reduce the speed, and the problem will cease to be displayed, and the machine will work adequately.
- You loaded in the unit underwear, the weight of which exceeds the permissible. The instruction manual indicates the maximum weight of things that can be loaded and not introduce additional loads and efforts for the adequate operation of your unit. Follow the operating rules and such problems can be avoided. Check and remove excess laundry from the drum.
- Too little laundry in the drum. No wonder the manufacturer indicates the maximum allowable weight of the laundry and adds a half load function. If the device contains too little or very small linen, the weight of which is below half the permissible, then this can also cause an imbalance in the load. Add the laundry, and the machine will safely reset the problem and work without interruption.
- Software crash.To eliminate it, you must perform a forced reboot. Unplug the power cord and leave the device without power for plus or minus 15 minutes. Then reconnect the unit to the power supply and the problem should stop showing. The machine will work adequately.
- The device must be installed in accordance with the requirements of the operating instructions. Using the building level, set the machine so that it stands level and matches the horizon and the vertical level. Then the machine will not vibrate unnecessarily, “jump or jump”.
Fulfilled all the detailed recommendations indicated? Did not help? Does the malfunction continue to be displayed? Then you need to seek help from specialists. The site provides contact information by which you can call professional craftsmen to repair large household appliances (washing machines).
