Gathered to arrange the day "H", clean the apartment and carry out a grand wash. They collected dirty laundry and plunged inside your assistant indispensable in everyday life. Installed the necessary program and launched it. And after a while, instead of adequate operation, water appears on the surface where the machine is installed and the abbreviation of E9, LE, LC or LE 1 failure is displayed.
Note. This problem is displayed immediately after startup, or the device downloads and immediately pumps out water. And as a result of unsuccessful attempts to start washing, the machine reproduces the LE problem on its screen.
It happens that an error occurs at the stage of washing or rinsing for no reason with an apparent external absence of leaks.
A Samsung device, in which the manufacturer does not provide a display, will notify of the problem with the characteristic LED illumination: the washing function LEDs blink and the temperature LEDs 30 ° C and 95 ° C (Bio 60 ° C) light up.
Fault value
Character abbreviation LE, LC, E9, LE1, displayed on the device’s display, notifies you that there is something wrong with the device with draining or pumping water. Perhaps there is a leak somewhere in the case. If the sensor is constantly in the drum fixes water leak in the washer (the water level in the tank is not constant, it is constantly decreasing), then it will signal this to the control board and the machine will stop. As a result, the tamper code will be displayed on the monitor.
It should be noted! The abbreviation of the symbols for the E9 problem is displayed on devices manufactured up to and including 2007.
Samsung units, in which the manufacturer provides for the presence of an akvastop, will notify of a malfunction (a special controller designed to control water leaks in the device’s casing (pallet) will notify of the presence of water losses), display a breakdown on the screen after stopping the running mode.
Mainly the presence of such a combination of symbols notifies of a serious malfunction, which only specialists in their field (repair technicians) can eliminate. However, there are small errors that even a child can correct. Consider what you can do at home so as not to turn to professionals for help.
Malfunction LE, E9 and how to fix it without resorting to professional intervention
- Inspect the drain hose. If the machine is not directly connected to the sewer system. Do not forget to drain to the toilet or directly to the bathroom. Either the hose itself flows directly or dirty water seeps into the constituent elements of the sewer system.
- Bought a car, connected to the sewer system. And instead of adequate operation, the display shows a breakdown. Means, you incorrectly connected the machine. It is necessary to withstand all slopes and elevations so that gravity does not fall into the tank of the machine by gravity. Can't reconnect your device yourself? Then call our specialists and they will help to solve the problem.
- The filter should not be clogged (clean) and correctly installed, with an exact fixation. Check the correctness of its installation (suddenly, it loosened the fasteners, or you did not fix it, after cleaning).
- You have discovered a leak, water seeps through a special dispenser for powders of various consistencies.Then clean the dispenser itself (it may contain foreign objects or powder residues that do not allow the supplied water to soak the detergent to enter the drum of the device). Therefore, soapy water comes out on the front panel of the device.
- You find that foam is leaking from the tray. Then pay attention to the quality of the product used and its volume placed in a special tray for detergents, perhaps you inadvertently poured a lot of product. If you have changed the product, then maybe its quality does not meet the requirements for powders. Pay attention to the structure of the materials from which your things are made. For each material you need to use special tools (universal, for woolen, delicate and other materials).
- Examine the correctness and integrity of the special connecting fixtures on all pipes, hoses, etc., connections to both the water supply and the sewer system.
- Software crash. To resolve this error, you must perform a forced reboot. Disconnect the device from the power supply for plus or minus 15 minutes. Restart the machine. After resetting current programs, it should start to work adequately.
- Inspect the water supply and sewage system itself. As a result of leaks in these systems, water enters the drip tray of your unit. The special float (akvastop) located there fixes a leak and transfers information to the control unit. And the solution of the device is understandable, stopping the current process and displaying a combination of characters indicating a LE fault.
- Violation of the integrity (open) of the contact circuit. Examine contact connections on a site from a pressostat, an akvastop and the control unit. If you disconnect and reconnect the loops, the fault should stop displaying. And the machine will work efficiently.
Fulfilled all the above detailed recommendations? Does the abbreviation of the fault continue to appear on the display? Then you should definitely seek help from specialists. Call the masters of repair of large household appliances (washing machines), who will inspect and fix the problem, reanimate and extend the life of your home assistant.
