When the unit starts, the problem is displayed on the LCD in the form of the abbreviation SE. The washing program is not executed, but only water is being pumped. The tank of the LG washing machine does not start to rotate, it is stationary and moreover does not gain momentum on any program of the device. Such a breakdown can only be in units equipped with direct or belt driven.
Meaning abbreviation fault
A SE malfunction, which appears on the display of the device, indicates that the motor is defective. Rotor can't rotate a washing machine drum and, of course, you cannot wash without establishing a cause and its elimination. After all, the engine consists of the main elements - this is the rotor and stater.
In addition to such a serious malfunction associated with the smooth operation of the electric motor, a simple breakdown could occur due to the inability to supply power to the shaft to start its rotation. For example, if the electrical contacts are oxidized, electronics etc. have failed, which you can eliminate without the help of professionals.
SE damage - how to carry out simple repair work without the help of specialists
- If there was a banal failure of automation (electronics), then eliminating such a problem will not be difficult for you. Disconnect the device from the network, leave it turned off for 20 minutes, then try to turn on the washing mode again.
- It is necessary to investigate the connecting elements (the correct connection of the contacts located in the terminal box), you need to disconnect them, and then connect them correctly. Then the device can earn again.
But suddenly, as a result of such simple manipulations, the device continues to show a malfunction, then you need to contact the repair shop and call the master, because you will not succeed in eliminating a serious malfunction without the professionals.
