Gathered to do their cherished wash. They plunged the collected dirty laundry into the drum of your home assistant, without which today it is difficult to imagine your life and life. Installed the necessary program and launched. And as a result, instead of adequate operation, they found the abbreviation for F18 failure on the display.
When the device does not have a screen provided by the manufacturer, it will notify of a breakdown using the characteristic LED illumination depending on its model:
- Constantly lit LED lights indicating function spin and quick wash or the additional rinse and delay wash LEDs blink.
Fault value
The control module does not respond to selected commands. The processor responsible for managing the device is not working properly. As a result of such a breakdown, the machine does not react at all and does not respond to any command, and completely refuses to work. This is a very serious malfunction, which is very rare, and mainly eliminated only by professionals.
What needs to be done in order to eliminate it without professional intervention
- There was a trivial software crash. If you find such a breakdown for the first time. You will need to force a reboot. Those. disconnect the device from the power supply. Wait plus or minus 15 minutes. The failure must be resolved. Run the washing machine again, it should work safely.
Forced reboot! Does the problem continue, is it displayed? Did not help? Then you should seek professional help. Call the washing machine repair technician.
