They collected the laundry and loaded it into the drum of the device, set the necessary mode and turned on the “Start”, and as a result of adequate operation, its display showed a malfunction with the abbreviation F03.
If there is no display in the unit, then such a malfunction is determined by the characteristic LED illumination:
- two LEDs blink together, indicating the function of “quick wash” and “speed selection”, or “speed selection” and “additional rinse”.
Fault value
The combination of F03 notifies the failure of the temperature controller. In addition, you can observe the lack of water heating, the unit starts to execute the program you specified, and then abruptly stops all the processes that have begun.
Also about malfunction code F22 in the wash Boschcan be found here.
How to repair at home without professional intervention
- It is necessary to establish the cause of the malfunction, set the rinse mode and restart the washing program.
- Software crash. You can troubleshoot such a malfunction with a forced reboot. Turn off the power supply for a period of plus - minus 20 minutes, then reconnect your unit and start the washing mode. Your washing machine should adequately execute installed programs and selected modes.
- The gap in the contact network. Inspect the area from the temperature controller to the electric heating element.
If you tried all the recommendations, and your machine could not reset the notification of damage, then you can not cope without professional intervention. Ask for help and call a specialist in the repair of large household appliances (washing machines).
See also: how determine the error code by the burning indicators.
