Error code F63 appears on the display when the self-diagnosis system detects a malfunction in the functional protection. Failure occurs in two cases: if a processor failure is detected or if there are errors in the software. This code is not spontaneous, usually the problem is indicated by other signs, for example, the machine does not turn on. Another true "bell" - periodically when you turn on the washing machine, the machine knocks out.
How to solve the problem at home?
Before you hand over the washing machine for repair, you can try to fix the code yourself. To do this, restart the system control module. Turn off the power to the machine for a quarter of an hour, and then turn it on again and try to run any program. If the F63 lights up again on the display, a serious repair is inevitable.
Also read: What measures to take to fix error F17 in the Bosch washer?
What needs to be repaired?
In this case, specialists in the workshop check and repair one of the following components:
- Washing machine processor;
- System board or control unit.
In some cases, minor repairs can be performed independently, but if the processor or control board fails, it is difficult to do something yourself, and on the contrary, you risk harming it. Therefore, if after rebooting the code still appears, immediately contact the wizard.
But you can avoid such problems. Often they happen due to the fact that contacts on the board are oxidized in a room with high humidity. Since cars are most often installed in the bathroom, such a problem is not uncommon. Do not forget to ventilate the bathroom, this will help extend the life of the machine, like any other electrical appliance.
