They collected all the dirty things, loaded them into the device’s tank and installed the necessary program, but when connected, the F09 fault was displayed on the screen, as a result the device stopped and did not respond to the set mode.
When your device, the manufacturer does not provide a display, the breakdown will be displayed using the following light illumination:
- The first Ariston Margherita models signal the presence of a breakdown with a whole repeating blink cycle, which consists of the Morse code (nine blinks of the network indicator light, interval up to 10 seconds of silence, and repetition). In addition to the alert, the switch knob constantly rotates in a clockwise direction and makes characteristic audible clicks.
- Ariston with modifications AVL, AVTL, AVSL, etc. display a problem by blinking two indicator lights first and bottom and top, which are responsible for additional functions. In addition, to confirm the error, the indicator light for locking the door of the washing machine blinks at a shorter interval (almost constantly).
- Hotpoint-Ariston modifications ARSL, ARXL, ARTL and others display a malfunction due to light illumination in the form of blinking of the first and fourth indicator lights indicating the door is locked and the spin mode (countdown must be carried out from the bottom up). In addition, the presence of this failure can sometimes be notified due to constantly lit indicators, responsible for the presence of auxiliary functions.
- Hotpoint-Ariston Aqualtis AQSL models notify you of an F9 problem by blinking the first and fourth temperature indicator lights.
Fault value
Malfunction F09 in the device indicates that there was a failure of the electronic module responsible for the selection of programs installed by the manufacturer, the operation of the device. As a result of such a breakdown, the washing machine does not respond to the established modes, it simply does not perceive them.
Trouble code F 9, what you need to do to make the washing machine work without calling professionals
- Computer software failure. When you first discovered such an error at startup, the repair will be very simple for you. Unplug the power supply for up to 5 minutes. Then start the machine again, at startup, a reboot will be performed and it will work in normal mode.
- Gap (break) in a contact chain. To eliminate it, you need to inspect so that there are no breaks in the contact circuit, how the loops are connected, disconnect and reconnect them. Restart the device again, the error should be fixed.
We performed all the recommended manipulations, checked the contact circuit, but, alas, your machine did not work? At startup, F9 is displayed again? Then you need professional help, call the washing machine repair technician.
