We loaded the laundry into the drum, started the washing program for your Ariston or Hotpoint-Ariston washing machine, but instead of trouble-free operation, the abbreviation F01 or F1 is displayed. If such a malfunction first appeared, it is best to immediately seek professional help, because in the future such a combination of letters will glow when you turn on any program on your device.
Sometimes such a malfunction can sometimes be highlighted, then disappear. We strongly recommend that you seek professional help and repair your device! Otherwise, the moment will come that the machine will refuse to work at all and then its repair can cost you a very round amount.
For models without a display, an error is displayed using light illumination:
- On the first produced cars, such a malfunction is indicated by the blinking of the indicator light, which is responsible for starting the device. In addition, the program selection knob constantly rotates, does not select any program and does not stop and the porthole lock button is constantly lit.
- Recent models that are not equipped with a display display such an error by blinking the indicator light of the Extra Rinse program and blinking at very short intervals of the indicator lamp Lock, which is responsible for locking the door.
- Hotpoint-Ariston Low-End models (ARSL, ARMXXL, ARXL, etc.) you can determine the breakdown, which will be displayed by flashing the indication “Lock” or by indicating all the auxiliary program buttons.
- Hotpoint-ariston aqualtis notify of a breakdown by glowing indicator lights responsible for temperature conditions.
Fault value
The combination code F01 / F1 in the Ariston unit indicates that the motor control module is not working properly. The engine rotor does not rotate the tank of the device, it stands still and no program starts. As a result of the lack of communication between the drum and the motor, the code F01 / F1 is displayed
It should be noted! For Ariston Dialogic (AD) units, the value of such a breakdown corresponds to a malfunction with code F12, and indicates a violation of the message between the "brains" and indicator lights.
Mostly, such a breakdown is displayed on the screen and indicates a very serious problem, and to fix it, you need to seek professional help.
Combination of malfunction F01, how to eliminate it
- The failure of the electronics responsible for launching work programs. When indicating the failure of F 01, which was displayed for the first time, you must disconnect your device from the power supply. As a result of such an operation, the previous mode will be reset and your machine should work without fail. Remember that frequent malfunctions are caused by increased humidity in the room in which the unit is located.
- Power surges. If the voltage supply in the apartment is different from the nominal 220 V, then the device will not work. It is necessary to eliminate interruptions, if possible install a voltage stabilizer.
- Check the cable from the machine to the plug so that it does not have gusts, kinks or protruding wires. If there are any, then they need to be eliminated.
You have followed all the recommendations, but there is no result. Device is not working? Is the breakdown still showing on the display? Then you need to call professionals, please contact us for help.
