A couple of decades ago, dishwashers were the privilege of only wealthy citizens of our country, as well as movie heroes. Very little time passed, and this unit appeared in the homes of ordinary people.
Manufacturers of equipment were able to fine-tune the technology of manufacturing dishwashers so that they were not expensive and would save time, energy and labor costs of housewives. Like any other technology with an extended service life, dishwashers begin to malfunction and accumulate errors, such as e03, e4, e22, e24, e09 and many others. Many of the software errors block the operation of the equipment and prevent it from being used for its intended purpose. At such a moment, the housewives and the owners have a question, how reboot dishwasher quickly and without consequences.
Like any other appliance with an extended service life, dishwashers begin to malfunction and accumulate errors
Causes of errors in the dishwasher program
The range of causes of a malfunction in the dishwasher is quite extensive:
- There was a fluid leak;
- Programs do not work correctly;
- The machine does not pick up water;
- The machine does not drain water;
- The dishwasher does not heat the water;
- Dishwasher overheats water;
- The dishwasher is collecting insufficient water;
- The runoff is clogged with food waste;
- The machine does not end the program;
- The parameters of the power supply network to which the device is connected do not meet the requirements of the manufacturer of the equipment.
The list of faults can go on and on, and overloads in the work of the power grid, and factory defects, and many other reasons can be attributed to it. It doesn’t matter what the main cause of the breakdown is, the hostess’s ability to restart the dishwasher alone does not relieve her of the need to call the home appliance repair technician or contact the service center.
The fact of the matter is that you should not constantly restart a faulty dishwasher. The accumulation of a large number of errors in the memory of the equipment can lead to a complete failure of work or leakage during the work cycle. The second situation is much more dangerous, as boiling water escapes out, which can cause considerable harm to the property and health of the housewife.
The accumulation of a large number of errors in the technology memory can lead to a complete failure of work or leakage during the working cycle
Key Dishwasher Defects
Despite the wide range of possible problems, there is a certain circle of the most common problems. The ability to diagnose the cause of the malfunction can give the owner the right to choose the method of eliminating them. In some situations, the owner of the equipment can do on their own and not pay for the help of the master.
- The device does not turn on.
- It is necessary to check the serviceability and voltage in the mains of the room where the device is installed. Perhaps the matter is to de-energize the entire room.
- Check the condition of the power cord. Kinks, bare spots, creases and so on can lead to incorrect supply of electric current to the device.
- The dishwasher was tripped. In such a situation, just restarting it is enough.
- Water appeared under the typewriter. As a rule, this fact does not mean anything serious. Possible causes of its occurrence are resolved at the household level.
- Damaged drain or discharge hose.
- Permissible water level exceeded.
- Excessive detergent level exceeded.
- During washing, a surfactant or SMS is used, not intended for a dishwasher.
- The device is mounted on an inclined surface.
- Unwashed dishes. Most likely, the sprinklers are clogged with the equipment, respectively, they must be cleaned.
- There is no water heating. The most common cause is a breakdown of the heating element, which burns out over time. The second reason is a malfunction of the control unit.
- The device works too loudly.
- The machine is not installed on an uneven surface; reinstallation is required.
- The pump is defective, it needs to be replaced by a master.
The appearance of water under the machine is not a sign of serious damage.
We also recommend reading about cause of error e24 in the dishwasher.
Emergency actions in case of a dishwasher error
Modern technology is so smart that it is capable of reporting a malfunction itself. In the case of equipment with a display, the user will see on it a specific word or a combination of letters and numbers. On technology without display indicators will indicate a breakdownthat will flash in a certain sequence. All methods of communication between household appliances and the owner are described in detail in the instructions for use, so do not be lazy, but you must read the annotation after buying a new item in the house.
So, how to reset the error, finish washing the dishes or just empty the machine in case of a malfunction.
- First of all, you need to interrupt a faulty program. To do this, the dishwasher must be turned off. There are two simplest and most effective ways to do this.
- Unplug the power cord for 25 minutes. This time is enough for the dishwasher control module to reboot and get rid of accumulated errors.
- Press the on / off button for 20 seconds. Such an action will also lead to a reset of accumulated software errors.
- After emergency measures have been applied, you need to understand the cause of the breakdown.
- In the event that the breakdown was simple, for example, the machine did not finish the program or the hole for draining the water is clogged, the root cause of the malfunction can be eliminated independently. In the first case, simply by restarting the program, and in the second, by cleaning the drain.
- In the event of an error due to incomprehensible factors, you should immediately contact a service center or a workshop for repairing household appliances. There, specially trained professionals can say what was the source of the problems and correctly eliminate it.
- Having learned the cause of the breakdown and received a properly functioning unit, in the future, it is necessary to exclude risk factors for repeated malfunction and be more careful about the technique.
Features of Bosch brand dishwashers
The bright minds of Bosch engineers have provided a specific algorithm that allows you to reset all settings easily and quickly at home.
Bosch dishwashers have the ability to reset all settings without calling the wizard
In order to take advantage of this innovative program of a modern Bosch brand dishwasher, you need to perform the following procedure:
- Open the dishwasher door fully
- Press the “Enable” key
- At the same time, hold down the keys responsible for the execution of the first and third programs
- Close the door and then open it again
- Hold the reset key for 3 seconds
- Close the door and wait until the signal on the completion of the dishwashing process lights up.
- Reopen the door and turn off the unit
This sequence of actions will cause the machine to reboot, erase all errors from memory and return to the factory settings.However, it should be borne in mind that if the owner of the equipment has doubts about his strength and the correctness of the actions, it is better for him or her to contact a specialized service center.
Preventative measures
Aware - means armed; accordingly, knowledge of ways to prevent the occurrence of malfunctions in the dishwasher will help prevent their occurrence and protect the owners of equipment from force majeure in the form of a flood or the purchase of a new unit. The main and simplest measures to prevent damage to equipment include the following list.
- Monitoring the temperature of the water that enters the machine. For most manufacturers of household appliances, this level is kept in the range of 50 ° - 60 ° C.
- Control the amount of rinse solution. Its quantity must always comply with the norm specified in the instruction manual.
- Systematic cleaning of all filters.
- Mandatory compliance with all requirements and standards of the operating instructions up to the observance of the principles of arranging dishes.
- Mandatory use of a power filter when connecting the device to the mains in order to avoid the negative impact of possible voltage surges.
The amount of dishwashing solution should always comply with the norm specified in the instruction manual
Somewhat stand out from this list, but very useful in everyday terms will be the last tip. Opening the door for 15 minutes after unloading will help prevent unpleasant odors from the dishwasher. Thus, the internal surfaces of the unit will be able to completely dry without creating soil for the reproduction of microbes and bacteria.
Subject to all preventive measures, as well as carefully following the instructions for use of the dishwasher, it will serve its owners for many years and will gladly take on all the work to combat dirty dishes in their home.
